Investigation on the influence of methanol on adsorption and leaching of pesticides with soil column liquid chromatography

The effect of methanol of low concentration on adsorption and leaching of atrazine and tebuconazole was studied in this paper. The adsorption coefficients and the retardation factors (R^m) of pesticides on EUROSOIL 3# log-linearly decreased as volumetric fraction of methanol (f^c) was increased in the binary solvent mixtures of methanol and water. These data are consistent with solvophobic theory formerly outlined for describing the adsorption and transport of hydrophobic organic chemicals from mixed solvents. Nevertheless, the adsorption of these pesticides in soil–water system slightly increased when the soil was pre-washed with methanol in comparison with that pre-washed with water (pure water system). Furthermore, their adsorption coefficients were still higher in binary solvent systems with methanol of very low concentrations, i.e. f^c<0.03 for atrazine and f^c<0.01 for tebuconazole, than those in pure water system. The adsorption coefficients (logK^w) of atrazine and tebuconazole predicted by solvophobic theory were 0.5792 and 1.6525, respectively, and their experimental logK^w were 0.3701 and 1.6275 in pure water system. Obviously, the predicted logK^w of the two pesticides was higher than the experimental log K^w in pure water system. The predicted K^w and the retardation factor (R^w) in pure water system by solvophobic theory are thus possibly inaccurate.     

锶—89在珍珠岩中吸附的研究

研究了不同粒径的珍珠岩对＾８９Ｓｒ的吸附。结果表明，珍珠岩对＾８９Ｓｒ具有较强的吸附能力，饱和吸附率大于９５％；通过振荡能加速珍珠岩对＾８９Ｓｒ的吸附；珍珠岩对＾８９Ｓｒ的吸附率与时间关系由多项指数描述；不同粒径的珍珠岩对＾８９Ｓｒ的吸附率没有明显差异。     

Adsorption of a dye on clay and sand. Use of cyclodextrins as solubility-enhancement agents

Laboratory-scale studies were aimed at elucidating the physico-chemical aspects on the removal process of crystal violet (CV) from waters and solid substrates. The laponite clay (RD) and sand were chosen for the double aim at investigating them as CV adsorbents for water treatment and as substrates which mime the soil components. Sand is very effective in removing CV from waters. The cyclodextrins (CDs) were exploited as solubility-enhancement agents to remove CV from the solid substrates. They are powerful solvent media because they extract the CV from sand forming water-soluble CV/CD inclusion complexes and do not show affinity for sand. Optimum performance was shown by the modified CDs (i.e. hydroxypropyl-β-cyclodextrin and methyl-β-cyclodextrin). A linear correlation between the logarithm of the equilibrium constant for the CV/CD inclusion complexes formation (K_cpx) and the maximum amount of CV extracted from sand in the columns experiments at a flow rate of 1.5 ml min⁻¹ was drawn. This relationship predicts that CDs with K_cpx < 180 M⁻¹ are not suitable for CV removal from sand. CDs failed to displace CV from RD because they generate the formation of RD clusters where CV remains entrapped.     

腐殖酸、细颗粒泥沙对粉末活性炭吸附苯酚特性影响的研究

通过一系列实验,探讨了粉末活性炭吸附水中苯酚时,腐殖酸(HA)浓度和细颗粒泥沙用量对苯酚吸附量和去除率的影响.实验结果表明:在中性条件下,随着HA浓度的增加,粉末活性炭对苯酚的吸附量减少;在不同质量细颗粒泥沙的影响下,苯酚的去除率基本不变;在未加HA时,粉末活性炭对苯酚的吸附行为用Langmuir吸附等温式拟合效果最好,对苯酚的最大吸附量为150.60 mg/g,而在有HA存在时,粉末活性炭对苯酚的吸附行为用Freundlich吸附等温式拟合效果最好,对苯酚的最大吸附量为28.49 mg/g.     

Removal of a cationic dye from aqueous solutions by adsorption onto bentonite clay

The ability of bentonite to remove malachite green from aqueous solutions has been studied for different adsorbate concentrations by varying the amount of adsorbent, temperature, pH and shaking time. Maximum adsorption of the dye, i.e. >90% has been achieved in aqueous solutions using 0.05 g of bentonite at a pH of 9. Thermodynamic parameters such as ΔH°, ΔS° and ΔG° were calculated from the slope and intercept of the linear plots of ln K_D against 1/T. Analysis of adsorption results obtained at 298, 308, 318 and 328 K showed that the adsorption pattern on bentonite seems to follow the Langmuir, Freundlih and D–R isotherms. The temperature increase reduces adsorption capacity by bentonite, due to the enhancement of the desorption step in the mechanism. The numerical values of sorption free energy (E_a) of 1.00–1.12 kJ mol⁻¹ indicated physical adsorption. The kinetic data indicated an intraparticle diffusion process with sorption being first order. The rate constant k was 0.526 min⁻¹. The concentration of malachite green oxalate was measured before and after adsorption by using UV–Vis spectrophotometer.     

Potential applications of porous organic polymers as adsorbent for the adsorption of volatile organic compounds

Volatile organic compounds (VOCs) with high toxicity and carcinogenicity are emitted from kinds of industries, which endanger human health and the environment. Adsorption is a promising method for the treatment of VOCs due to its low cost and high efficiency. In recent years, activated carbons, zeolites, and mesoporous materials are widely used to remove VOCs because of their high specific surface area and abundant porosity. However, the hydrophilic nature and low desorption rate of those materials limit their commercial application. Furthermore, the adsorption capacities of VOCs still need to be improved. Porous organic polymers (POPs) with extremely high porosity, structural diversity, and hydrophobic have been considered as one of the most promising candidates for VOCs adsorption. This review generalized the superiority of POPs for VOCs adsorption compared to other porous materials and summarized the studies of VOCs adsorption on different types of POPs. Moreover, the mechanism of competitive adsorption between water and VOCs on the POPs was discussed. Finally, a concise outlook for utilizing POPs for VOCs adsorption was discussed, noting areas in which further work is needed to develop the next-generation POPs for practical applications.     

臭氧-生物活性炭技术在微污染饮用水处理中的应用

通过研究国内外臭氧—生物活性炭工艺的发展现状和应用实践，指出了该项技术在应用中体现出的优越性，并提出了此项技术在应用中存在的问题，部分地介绍了提高此项技术应用水平的措施。研究表明，臭氧—生物活性炭工艺在处理微污染饮用水将会受到重视和广泛地推广应用，同时也对今后的研究方向提出了相应的观点。     

Three-dimensional biogenic C-doped Bi2MoO6/In2O3-ZnO Z-scheme heterojunctions derived from a layered precursor

Novel 3D biogenic C-doped Bi_2 MoO_6/In_2O_3-ZnO Z-scheme heterojunctions were synthesized for the first time, using cotton fiber as template. The as-prepared samples showed excellent adsorption and photodegradation performance toward the hazardous antibiotic doxycycline under simulated sunlight irradiation. The morphology, phase composition and in situ carbon doping could be precisely controlled by adjusting processing parameters. The carbon doping in Bi_2 MoO_6/In_2O_3-ZnO was derived from the cotton template, and the carbon content could be varied in the range 0.9–4.4 wt.% via controlling the heat treatment temperature. The sample with Bi_2 MoO_6/In_2O_3-ZnO molar ratio of 1:2 and carbon content of1.1 wt.% exhibited the highest photocatalytic activity toward doxycycline degradation,which was 3.6 and 4.3 times higher than those of pure Bi_2 MoO_6 and Zn In Al-CLDH(calcined layered double hydroxides), respectively. It is believed that the Z-scheme heterojunction with C-doping, the 3D hierarchically micro–meso–macro porous structure, as well as the high adsorption capacity, contributed significantly to the enhanced photocatalytic activity.     

Heterogeneous photocatalytic degradation of diuron on zinc oxide: Influence of surface-dependent adsorption on kinetics, degradation pathway, and toxicity of intermediates

Heterogeneous photocatalytic reaction has been generally applied for degradation of toxic contaminants. Degradations of a compound using the same kind of catalyst that was synthesized differently are commonly found in literature. However, the reported degradation intermediates are normally inconsistent. This issue is especially important for the degradation of toxic compounds because intermediates may be more toxic than their parent compounds and understanding the reason is necessary if appropriate catalysts are to be designed. This work systematically compares the photocatalytic degradation of diuron, a toxic recalcitrant herbicide, on two forms of zinc oxide (ZnO), i.e., conventional particles with zinc- and oxygen-terminated polar surfaces as the dominating planes, and nanorods with mixed-terminated nonpolar surfaces. Experimental and theoretical results indicate that both the rate of reaction and the degradation pathway depend on the adsorption configuration of diuron onto the surface. Diuron molecules adsorb in different alignments on the two surfaces, contributing to the formation of different degradation intermediates. Both the aliphatic and aromatic sides of diuron adsorb on the polar surfaces simultaneously, leading to an attack by hydroxyl radicals from both ends. On the other hand, on the mixed-terminated surface, only the aliphatic part adsorbs and is degraded. The exposed surface is therefore the key factor controlling the degradation pathway. For diuron degradation on ZnO, a catalyst confined to mixed-terminated surfaces, i.e., ZnO nanorods, is more desirable, as it avoids the formation of intermediates with potent phytotoxicity and cytogenotoxicity.     

From waste hot-pot oil as carbon precursor to development of recyclable attapulgite/carbon composites for wastewater treatment

The utilization of waste products as valuable materials was a technical imperative for waste management. In this study, the cost-effective attapulgite/carbon(APT/C) composite was developed for wastewater treatment using waste hot-pot oil as a carbon precursor through a facile one-step calcination process. The APT/C composite prepared at 300°C exhibited the excellent adsorption capacity and rapid equilibrium rate over a broad p H range for the removal of various pollutants. More importantly, the removal ratios of the composites toward Methyl Violet and tetracycline still remained 77.6% and 60.2% of the initial adsorption capacity after ten adsorption–regeneration cycles via a facile thermal regeneration strategy, respectively.Beyond all doubt, this research provided a feasible and economical way for the sustainable utilization of waste hot-pot oil in wastewater treatment, achieving the concept of disposal waste with waste and recycling.